Maxim Integrated 71M6534 Energy Meter IC Family Software - Manual (Page 29)

71M653X Software User’s Guide
It should be noted that not all header files are physically present in the project directory. The files absacc.h, string.h,
ctype.h, and setjmp.h are provided by the compiler manufacturer, and they are located in the Keil\C51\INC directory.
4.7.2 Adjusting the Keil Compiler Settings
Once, the Keil compiler is installed, the most convenient method to start the project is to double-click on the file
653x.UV2 (or 653x.UV3). This will start the Keil compiler with the proper settings stored in the 653x.UV2 file.
Directory structures and drive names vary from PC to PC. The settings for the compiler can be adjusted using the
following method:
1. Select “target1” in the leftmost window.
2. Select “project” from the top menu and then select “options for target 1”.
3. Select the “C51” tab.
4. Click the button right next to the “Include Paths” window. Three paths will be listed, pointing to meter
projects, meter projects\demo, and meter projects\demo\header files.
5. If necessary, delete these path entries (X button) and replace them with the corresponding path
entries for your PC ( button).
The dialog box should look like shown below. After making the necessary changes, the project file (653X_demo.UV2)
should be stored.
v1.1v1.1 TERIDIAN Proprietary 29 of 116
© Copyright 2005-2008 TERIDIAN Semiconductor Corporation