3 manually controlling the keil compiler settings, Manually controlling the keil compiler settings – Maxim Integrated 71M6534 Energy Meter IC Family Software User Manual
Page 30
71M653X Software User’s Guide
4.7.3 Manually Controlling the Keil Compiler Settings
If the method described in section “Adjusting the Keil Compiler Settings” is not used, the Keil compiler settings can also
be controlled manually.
The target options should be selected in order to adapt the compiler controls properly to the target. The uVision
compiler environment is started by selecting Programs Æ Keil Æ uVision2. uVision should start up and present the
following window:
Under Project
Æ Options for Target1, select the Device tab and check the selected device. Newer versions of the Keil
Compiler offer selection of TERIDIAN (labeled “TDK”) 71M653x devices:
v1.1v1.1
TERIDIAN Proprietary
30 of 116
© Copyright 2005-2008 TERIDIAN Semiconductor Corporation