4 shunt current sensor, Shunt current sensor – Maxim Integrated 78M6610+PSU Hardware Design Guidelines User Manual
Page 17
Advertising
AN_6610_107
78M6610+PSU Hardware Design Guidelines
Rev. 0
17
5.4 Shunt Current Sensor
The current shunt network can also be split between the 78M6610+PSU (daughter) board and the host
board. The 750
Ω termination resistors and anti-aliasing capacitors should be placed near the
78M6610+PSU’s analog input pins.
Figure 13: AIP and AIN Filter Network
The resistive current shunt can be placed remotely on the host board. It is important to provide a wide,
heavy copper path between the current shunt and its connections to high current AC wiring.
Figure 14: Current Shunt Sensor
Current
Shunt
78M6610+PSU
Termination
Resistors
Anti-Aliasing
Capacitors
Advertising