Canon 430 - Manual (Page 130)

128
• A TV set cannot be used in (stitch assist).
• No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV’s manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The default setting
varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan, etc.
- PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If the video system is set incorrectly, the camera output may not
display properly.
6 Press the ON/OFF button.
• The image will appear on the TV. Shoot or
play back images as usual.
• If the images are not appearing on the TV
when shooting, press the DISP. button.
Power Lamp