Canon 430 - Manual (Page 55)

53
Shoo
ting
Shooting in Auto Mode
In this mode, all you have to do is press the shutter button and let the
camera do everything else.
•See Functions Available in Each Shooting Mode (p. 160).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 54).
1 Slide the mode switch to and
turn the mode dial to .
2 Aim the camera at the subject.
3 Use the zoom lever to achieve the
desired composition (relative
subject size in the viewfinder) (p.
40).
4 Press the shutter button halfway (p.
41).
• Two beeps will sound when the camera
has finished metering, and the upper
indicator beside the viewfinder will light
green or orange. If the LCD monitor is on,
the AF frame will appear green.
• If the subject is difficult to focus on, the lower
indicator beside the viewfinder will blink yellow
and the beep will sound one time.
5 Press the shutter button fully (p.
42).
• You will hear the sound of the shutter
when the shutter activates.
• The picture appears for two seconds on
the LCD monitor.
Shooting