Temporary arbor installation, Permanent arbor installation a – New England Arbors VA68894 User Manual

Page 4

Advertising
background image

4

1915 Dove St., Port Huron MI USA 48060

Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286

www.edenarbors.com

Into Earth For Permanent Installation

STRONGLY RECOMMENDED

S T E P T H R E E

Temporary Arbor Installation

Arbors must be well secured to prevent tipping over from wind load etc.
We have provided four ground stakes for securing the arbor.
If you are installing your arbor on concrete or a wood deck, visit your
hardware store to purchase the appropriate galvanized bracketing
hardware.

Attach Ground Stakes

1

2

Permanent Arbor Installation

A

B

1

14 in.

35.5 cm.

Fasten all four ground stakes to the base of the posts using

the provided 1 1/4” screws (2 screws per anchor) as shown aside.

For a temporary arbor installation, carefully lift the arbor and

place into final location. Ensure the arbor opening is set

at 42” and that the arbor is plumb and level.

For a permanent installation, measure and dig four-8” holes, 14“

deep where the ground stakes will be located. The centers of the

holes should be a rectangular pattern with dimensions of

44 1/2” x 22”.

Fill excavated holes with mixed concrete and carefully lift arbor

into place. Plumb and level the arbor.

Note: The posts should not be set in the concrete.

Arbor Post

Ground Stake

Concrete

Ground

Advertising