New England Arbors VA42037 - Manual (Page 6)

H
G
Pergola Additional Materials List
www.edenarbors.com
Hardware
(in plastic bag)
NOTE: WE HAVE INCLUDED 10% EXTRA SCREWS
BEYOND WHAT IS IDENTIFIED BELOW.
All Screws Included with this Kit are Self-Auguring.
A. Vinyl Weld Glue (1)
B. 2 1/2” Self-Auguring Stainless Steel Screws (16)
(to lock vinyl column and wood post together at bottom of each post)
C. 2 1/2” Self-Auguring Stainless Steel Screws (16) (to lock vinyl column
and wood post together at top of each post just above trim cap)
D. 4” Self-Auguring Stainless Steel Screws (64) (to lock the intersection
of beams and first rafters with vinyl columns)
E. 1 1/2” Self-Auguring Stainless Steel Screws (48) (joiner screws)
F. 5/8” Self-Auguring Stainless Steel Screws (32) (for rafter brackets)
G. 1/8” x 2” Drill Bit (1) (to pre-drill holes on bottom of joiner to penetrate steel
inserts as necessary)
H. 2 1/2” Self-Auguring Stainless Steel Screws (72) (for shade slats)
Extra Materials You will Need
(Purchase separately from www.edenarbors.com or retailer of our products)
If Mounting Pergola on Concrete or Wood Deck
I. 4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)
J. 4x4 Bolt Down Bracket Kit (purchase from www.edenarbors.com or a
retailer of our products)
If Mounting Pergola in Ground
K. 4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)
L. Concrete Ready Mix (4) (purchase at local building center)
Tools You Will Need
• Level
• Hammer
• Tape Measure
• String Line
• Wood Stakes (4) (temporary support for string line)
• Step Ladders (2)
• Cordless Drill
Tools You May Need
• Circular Saw with Fine Tooth Blade
• Framing Level
• Framing Square
• Hacksaw (or a motorized cutting device designed to cut steel)
A B D
L
CONCRETE - Ready Mix
Not to Scale
6 10 x 10 Flat Top Pergola
Purchase Separately Purchase Separately
Purchase Separately Purchase Separately
F
I
K
C
E
J