New England Arbors VA42057 - Manual (Page 6)

www.edenarbors.com
S T E P T H R E E
6 10 x 10 Flat Top Pergola Canopy
Fasten the retainer brackets to the post as shown. Ensure the opening
of the bracket is facing the inside of the pergola. The upper inside face
of the bracket will be 1” from the bottom of the rafter. Use two screws
provided to fasten to post. Repeat for adjacent post.
From the inside of the pergola, insert the retainer bar into the opening
of the brackets.
Note: Because post location can vary slightly, if the retaining bar
does not fit easily it can be trimmed as necessary. Steel pipe can be
trimmed as well with a hacksaw.
Fasten the retaining bar into the brackets using one screw per bracket
as shown.
Repeat for other retainer bar.
Attach Retainer Bars
1
2
3
4
1
2
3
Note: Opening
1”