Step t wo, Insert floor panels & post caps, Optional – New England Arbors VA68210 User Manual

Page 2

Advertising
background image

STEP T WO

Pressure fit into place the floor panels.


Install the four post caps.

The Barcelona Planter Box

Insert Floor Panels & Post Caps

7

8

3

Optional

To Attach the Roman or Madrid Trellis, or the Luxembourg

Privacy Screen to this Planter Box (Purchase Separately).

Remove two post caps.

Attach trellis or privacy screen by over-sleeving the bulbed out
bottom end of the posts over the protruding posts of the planter

box until they both bottom out inside each other.

Install screws in the four pre-drilled holes at the bottom of each post.

Discard the two post caps from planter box and ground

anchoring stakes that come with trellis.

1915 Dove St., Port Huron MI USA 48060

Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286

www.edenarbors.com

Optional

Fit the opposite back wall panel over the side walls.


Reposition the assembled planter box so it stands upright on
the work surface. Ensure at this point the planter walls are square

to each other. This can be accomplished by making sure that

the corner to opposite corner measurement both ways are equal.


Using the screws provided, secure the side wall panels into the front

and back wall panels with 2 screws at the ends of the rails.

Ensure that panels are fully flush inside the posts and the wall

panels are square to each other. Screws should only be drilled in 1/2”

depth so that panels do not pull out of the posts when under stress.


Invert the planter box and repeat this same process at the

opposite end of each of the four post.


3

4

5

6

A

8

3

B

8

C

2

4

7

6

5

8

A

B

Advertising