New England Arbors VA68219 - Manual (Page 2)

The Burbank Potting Bench
3
2
2
S T E P O N E
Lay one of the pre-assembled side panel on the ground as shown
aside (Left panel shown) and insert the two pre-assembled top rails
as well as the two pre-assembled shelves. You might need a helper
to stabilize the components as they are inserted into the side panel.
Note: The shelf rails have tabs at the end of the extrusions; push them
firmly into the routed hole until the tabs lock into place.
With a helper, align and insert the other pre-assembled side panel
onto the assembly from Step One above.
Push shelf rails until the tabs lock into place.
Carefully stand up the potting bench on its legs as shown and insert
the two board supports to help stabilize the entire assembly.
Make sure the two board supports are fully inserted into the pre-
assembled top rails (they are notched)
1
The Burbank Potting Bench
www.newenglandarbors.com
1
Note: Shelf braces should be facing
down (away from the top rails)
2
3