New England Arbors VA84063 - Manual (Page 2)

S T E P T W O
Excavate four, 6-inch holes in a square pattern (46” x46”)
as shown aside. Holes are to be 12 inches deep.
Insert the Raised Bed assembly into the holes and replace
the excavated dirt back and around the posts.
The 4x4 Composite Garden Bed
Raised Bed Installation
1
3605 32nd St., Building 3, Port Huron MI USA 48060
Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286
www.newenglandarbors.com
3
2
S T E P O N E
Insert boards into the posts as shown. The boards are tabbed and
will lock into place once fully inserted into the routed holes on the
posts.
Repeat for all boards.
Place a post cap onto the top of each post. The design of the post
cap allows them to be press-fitted into place.
Raised Bed Assembly
1
2
1
Mitered
Tabbed
2 3
12”
6
46”
46”
1
2
2