Eden-milantrellis-1108-3-f, Step t wo, Mounting into the ground – New England Arbors VA68188 User Manual

Page 3: Step three, Step four, Optional

Advertising
background image

3

STEP T WO

Insert the ground anchoring stakes into the bottom of the privacy

screen posts. Secure with screws into the four pre-drilled holes.

Mounting Into the Ground

Install the Ground Anchor Stakes

1915 Dove St., Port Huron MI USA 48060

Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286

www.edenarbors.com

2

Trellises must be well secured in the event of high winds, etc. We
have provided two ground anchoring stakes for securing the privacy
screen either into the ground or into a concrete footing. If you are
installing your trellis directly to the wall of your home, or on a wood deck
or concrete surface, please see your hardware store for the appropriate
galvanized bracket hardware.

STEP THREE

Move the trellis to its final location. When you are satisfied with

the location, mark the positions of the posts, then move the trellis
aside and lay it carefully on it’s side. Excavate the 2 post holes

approximately 18" deep x 6" diameter. Carefully move the trellis

back into position.

Level it both vertically and horizontally into the excavated holes.

Backfill the holes with the excavated soil.

A

B

C

Install Trellis into Ground

STEP FOUR

Install the Post Caps

(Purchase Separately)

Please see instructions illustrated with the planter box.

OPTIONAL

Mounting to Barcelona Planter Box

4

A

3

18”

Level

6“

B

3

Advertising