NORAC UC4.5-BC Operator Manual User Manual
Page 40
36
•
To access the minimum height mode settings; press
from the run screen until "More?" is
displayed. Press
to accept.
•
Press
again until "Other?" is displayed. Press
to accept.
•
Use the
buttons to change the settings.
Minimum Height Soil Mode (default is 0)
Minimum Height Crop Mode (default is 0)
Units (cm or inches)
Figure 16: Minimum Height Mode and Units Menu
10.6 Changing the Units
To change the units, simply navigate to the units menu as shown in Figure 16. Use the
buttons to change between inches and cm.
10.7 Valve and Air Temperature
Pressing and holding
will cycle the display between the valve block temperature "VT" and
the air temperature "AT".
Metric (cm height) = Celsius
Imperial (inch height) = Fahrenheit
MHC 0
MHS 0
Units in
Sensor
Display
Setup