Novak 55-583X-1.2_Manufacturing 6-Up Layout (55-583X-1.2) - Manual

Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS
Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS
Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS
Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS
Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS
Novak R/C, Inc. California • 2014 • Made in China • 55-583X-1.2
This product contains chemicals which are known to the state of
California to cause cancer, birth defects, or other reproductive harm.
Specially formulated Lead-Free Solder with 3% Silver
content for high-conductivity, low-resistance, & strong
solder joints at a relatively low melting point.
Environmentally friendly & safe to handle--Perfect for hand soldering.
SOLDERING TIPS
Always use a good, high-heat soldering iron.
Preparing The Wire: Strip the insulation from the end
of the wire. Tightly twist the exposed strands of wire.
Apply heat to exposed wire with iron and add solder to
the tip of the iron and to exposed wire at the same time.
Soldering The Wire: Pre-tin the surface being soldered
to. Place stripped & tinned end of wire on surface and
heat with iron--add just enough solder to form a clean
and continuous joint from the surface up onto the wire.
IMPORTANT NOTE
PROLONGED/EXCESSIVE HEATING WILL DAMAGE PC BOARDS