Novak 55-5860-1.2_Manufacturing 9-Up Layout (55-5860-1.2) User Manual

Novak speed lube

Advertising
background image

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings: Wipe any dirt and debris build-up from the

outside of the bearing using a clean cloth. Apply oil along inner

edge of shield to allow oil to penetrate.
Sealed Bearings:
Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife

(or a mini flat blade screwdriver)

to gently pry

along the inner edge of the rubber seals to remove them from the

bearing. Clean exposed bearings with solvent to remove any debris

and old oil/grease. Apply a drop of oil directly to each ball. Replace

cleaned bearing seals (flatten seals if they got bent during removal).

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin

contact and always observe good housekeeping and personal hygiene measures such as

washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

©Novak R/C, Inc. All Rights Reserved • 2-2014 • 55-5860-1.2

(949) 916-6044 • Monday-Thursday

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

www.teamnovak.com

Advertising