Carrier Access Network Device Axxius 800 - Manual (Page 169)

Axxius 800 - Release 2.2 5-69
CLI Commands
set
set
set alarms set (ocudp) baud
set autoexit set (ocudp) loopback
set (bri) set (ocudp) loopdetect
set (bri) mode set (ocudp) mvec
set (bri) pmsync set (ocudp) secondary
set cclabel set (ocudp) selftest
set clock set (ocudp) up/down
set clock (1 and 2) set (router) autologout
set date set (router) default
set (ds0) set (router) dhcp
set (ds1) set (router) dns
set (ds1 card) set (router) enhanced security
set (ds3) set (router) lmi
set ethernet ip address set (router) lmi poll
set external alarm set (router) login auth
set (fxo) set (router) login prompt
set (fxsPS or fxsPSM) set (router) ntp
set id set (router) password
set idle set (router) port
set ip gateway set (router) ppp auth
set ipds0 set (router) ppp security
set key set (router) proxy
set login auth set (router) reboot
set login support set (router) rip
set lsbackup set (router) snmp
set lsprotect enable/disable set (router) stp
set lsprotect manual set (router) syslog
set lsprotect nonrevertive set (router-lan) filter forward
set lsprotect remove set (router-lan) framing
set lsprotect revertive set (router-lan) gateway