Carrier Access Network Device Axxius 800 - Manual (Page 309)

Axxius 800 - Release 2.2 5-209
CLI Commands
show
show (router-lan) static ip network
The show (router-lan) static ip network command displays the current list of static IP
network entries for the LAN on the specified Router card.
Syntax: show {rtr_lan-addr} static ip network
Example: show 5:1 static ip network
SLOT 5:
Static IP Network Settings for Adit50:
Network Subnet Mask Metric Next Gateway
100.0.0.0 255.0.0.0 1 192.136.43.52
Total: 1
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
show (router-lan) static ipx network
The show (router-lan) static ipx network command displays the current list of static IPX
network entries for the LAN on the specified Router card.
Syntax: show {rtr_lan-addr} static ipx network
Example: show 5:1 static ipx network
> show 5:1 static ipx network
SLOT 5:
Static IPX Network Settings for Axxius50:
Total: 0
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
slot The slot number (1-8) that contains the Router card.
port Port number of the Router.
"profile-name" The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
slot The slot number (1-8) that contains the Router card.
port Port number of the Router.
"profile-name" The profile name for the TSR interface. Name must be enclosed in
quotes, with a maximum length of 11 characters.