Image optimization – Philips 271P4QPJEB-27 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3-. Image Optimization
Optlons>Input - Willonly be active when
selecting Input from the drop-down Options
menu. On a non-supported display capable of
DDC/CI, only the Help and Options tabs are
available. AllotherSmartControlPremiumtabs
are not available.
•
Display the Source instruction pane and
current input source setting.
•
On single input displays, this pane willnot
be visible.
Optlons>Theft Deterrence - Theft Deterrence
Pane willonly be active when selectingTheft
Deterrence Mode from the drop-down Plug-in
menu.
To enableTheft Deterrence, clicking Enable
Theft Deterrence Mode button brings up the
following screen:
•
User can enter PIN between 4 and 9 digits
numbers only.
•
After entering PIN, Accept button takes
user to the pop-up dialog box on the
following page.
•
Minimum minutes set to 5. Slider set to 5
by default.
•
Does not require the display be attached
to a different host to go into Theft
Deterrence mode.
After creating PIN,theTheft Deterrence pane
will indicate Theft Deterrence Enabled and
provide PIN Options button:
•
Theft Deterrence Enabled is displayed.
•
DisableTheft Deterrence Mode opens
pane screen on next page.
•
PIN Options button only available after
user creates PIN, button opens secure PIN
web site.
Help menu
Help>User Manual - Willonly be active when
selecting User Manualfrom the drop-down
Help menu. On a non-supported display
capable of DDC/CI, onlythe Help and Options
tabs are available.
15