1 installation, Q package contents, Q install base stand – Philips 271P4QPJEB-27 User Manual
Page 6: Start, Setting up the monitor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Q Package contents
Qukk
Start
HDMI (Optional)
VGA (Optional)
USB (Optional)
DP (Optional)
Q Install base stand
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the VESA
mount area untilthe latch locks the
stand.
(2) Gently attach the base to the stand.
(3) Use your fingers to tighten the screw
located at the bottom ofthe base, and
secure the base to the stand tightly
Advertising
This manual is related to the following products: