phil&teds vibe 2 - Manual (Page 17)

To attach
a Position the vibe sunhood above the
vibe buggy frame ensuring that:
1 The top of the sunhood is clear
of the handle.
2 The zip is facing upward.
3 The sunhood frame clip tab is
on the top of the buggy frame.
1
2
3
b The hood attaches to the buggy
frame using the two clips (on either
side of the hood). We’d suggest you
attach the underside of the clip first.
c Slide the hood up or down the buggy
frame, to the height that best suits you.
d Open the sunhood into desired
position.
To remove
e Pull the sunhood clip tab outward
and away from the buggy frame.
done!
vibe sunhood instructions
model GT issue April 2008
Please read ALL the instructions and look CAREFULLY at the pictures. Trust us; this will really help!!!