phil&teds traveller (pre-2013) - Manual (Page 4)

traveller
traveller instructions
American Safety Standard (ASTM
F406-08a) states:
Read all instructions
BEFORE assembly and
USE of product. KEEP
INSTRUCTIONS FOR
FUTURE USE.
European Safety Standard (EN716-
1:2008) and French Safety Standard
(XPS 54-081) states:
IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY.
Australian/New Zealand Safety
Standard (AS/NZS 2195:1999) state:
IMPORTANT. BEFORE
ASSEMBLING THIS COT
READ AND UNDERSTAND
THE INSTRUCTIONS.
INCORRECT ASSEMBLY
MAY MAKE THE COT
UNSAFE.
DO NOT USE THIS COT
IF ANY PART IS BROKEN,
TORN OR MISSING.
KEEP THESE
INSTRUCTIONS IN
A SAFE PLACE FOR
FUTURE REFERENCE.
Assembling your new ` traveller is
effortless and tool-free. Just follow these simple
steps & in two minutes you’ll be there.
bits ~ bobs
The red numbers refer to traveller parts
indicated on the first page of this guide
1 4 x pegs
2 2 x silver end rails with black connectors
3 4 x silver half rails
4 Fabric set with 4 x silver legs attached
5 4 x feet (attached to legs and fabric set)
6 Plastic toggle
7 Elastic loop
8 Self-expanding mattress
9 Carry bag
safe ~ sound
We’ve attained the following safety standards:
• EN716-1:2008 EN716-2:2008
• ASTM F406-08a
• AS/NZS 2195:1999 CPN4
• CRC, c.932
• XPS 54-081
2