Pro Boat PRB0500 User Manual
Page 3
Miss Geico 24
Introduction
Pro Boat® RC models look as good as they perform. Our boats, which include everything from scale sailboats to
fully licensed powerboats, exceed expectations and provide years of radio control fun and excitement. Whether your
passion leads you towards the pure serenity of sailing or the all-out speed of a Deep-V, Pro Boat models fit your taste,
budget and lifestyle. You can count on us to be available any time you need help—the brand is backed by Horizon
Hobby, the world’s largest distributor of hobby-grade RC products. The Pro Boat brand will help you turn your boating
passion into a reality, whether you’re new to the hobby or an old pro.
Please read this manual for operation and maintenance instructions.
Register your boat online at www.proboatmodels.com.
3
EN
Specifications
Length
25 in (635mm)
Beam
8.75 in (222.25 mm)
Transmitter Pro Boat 2.4GHz
Receiver
Pro Boat 2.4GHz
Hull Material Plastic
Motor
15T 550 Brushed
water-cooled
ESC
50-amp Brushed with
reverse
Battery and Charger
DYN4113
2A peak charger
DYN1060EC 6-cell 2400mAh
Ni-MH battery
4 AA batteries (sold separately) are
required to operate the transmitter
Recommended Tools and Materials
• Needle nose pliers
• Paper towel
• Rubbing alcohol
• Open-end wrench: 10mm (2)
• Nut driver: 5.5mm
• Phillips screwdriver: #1
• Hex wrench: 2.5mm, 3mm
• Clear tape (PRB0102)
• Pro Boat
®
Marine Grease and Gun (PRB0100)
Product Inspection
Carefully remove the boat and radio transmitter from
the box. Inspect the boat for damage. If you find
damage is present, please contact the hobby shop where
you purchased your boat or the nearest Horizon Hobby
service center.
Contents