Pro Boat PRB2550 - Manual (Page 2)

22
Congratulations on the purchase of your
Pro Boat
™ Miss LLumar. This is a 1/8-scale replica
of the world famous full-scale hydro. You are just
minutes from one of the most thrilling experiences
the radio control hobby has to offer.
The Pro Boat Miss LLumar is a professionally built,
ready-to-run fiberglass model.
Powered by the potent Zenoah ® G26M engine, you
will be able to race across the water at speeds in
excess of 35 mph!
It is very important that you operate this boat
responsibly. With proper care and maintenance, you
will be able to enjoy your Miss LLumar for many
years to come.
Carefully unpack your Miss LLumar and examine
the boat and its contents. The box should contain
the Miss LLumar RTR with radio installed, a boat
stand, and the JR
® XR3i radio transmitter. If you are
missing any of these items or notice any damage,
immediately contact the place of purchase.
Table of Contents
Limited Warranty & Limits of Liability .................................................................................................................... 3
Additional Required Items ......................................................................................................................................... 5
Suggested Field Equipment and Supplies ................................................................................................................ 5
Contents ........................................................................................................................................................................ 5
Section 1: Building the Boat Stand ........................................................................................................................... 6
Section 2: Attaching the Turn Fin .............................................................................................................................. 6
Section 3: Removing the Canopy ............................................................................................................................. 7
Section 4: Installing the Radio System Batteries ................................................................................................... 7
Section 5: Installing the Rudder ................................................................................................................................ 9
Section 6: Propeller Balancing ................................................................................................................................... 9
Section 7: Fueling the Tank .......................................................................................................................................10
Section 8: Fuel/Oil Mixture ......................................................................................................................................10
Section 9: Range Check the XR3i Radio System ...............................................................................................10
Section 10: Starting the Engine ...............................................................................................................................11
Section 11: Stopping the Engine .............................................................................................................................12
Section 12: Initial Launch of the Miss LLumar ....................................................................................................12
Section 13: Cooling System .....................................................................................................................................13
Section 14: Clutch ......................................................................................................................................................14
Section 15: Troubleshooting Guide ........................................................................................................................15
Section 16: Hull Care ................................................................................................................................................15
Section 17: Maintenance ...........................................................................................................................................15
Section 18: Replacement Parts ...............................................................................................................................17
Appendix ......................................................................................................................................................................18
Introduction