Pro Boat PRB2550 - Manual (Page 5)

5
Although the Miss LLumar comes fully assembled and ready for action, you will need a few additional items
in order to run your boat. You will need the following:
Zenoah® 2-Cycle Oil (ZEN20001)
CA or epoxy glue
Flex Shaft lubrication (see local hobby store)
Fuel container Fuel Pump (HAN155)
12 “AA” alkaline batteries (8 for the transmitter
and 4 for the receiver)
Gasoline (+87 Octane), ethanol-free
In addition to the items needed to run the Miss LLumar, we recommend that you carry the following
in your field box:
Engine Tuning Screwdriver (DYN2775)
Clean towels
Extra Propellers (PRAB270)
2mm hex wrench
2.5mm hex wrench 4mm hex wrench
#1 Phillips
Small crescent wrench
Wax
Screw-locking compound
Additional Required Items
Suggested Field Equipment and Supplies
Contents
• Assembled 1/8 scale Miss LLumar RTR
• JR
® XR3i radio transmitter
• Boat stand
• Rudder