Pro Boat PRB2550 - Manual (Page 9)

9
Parts Required
Rudder
2.5mm hex screw
Tools and Adhesives Required
2.5mm hex driver
 1. Locate the stainless steel rudder and
2.5mm hex screw.
 2. Carefully insert the rudder as shown.
 3. Find the flat spot on the rudder. Using the
2.5mm hex screw, tighten the hex screw on the
flat spot as shown.
For optimum performance, propeller balancing can
add several mph to top speed and reduce vibration.
There are several different propeller balancing tools
available. Read the instructions that accompany
the propeller balancing tool regarding removing
material from the propeller. Removing material from
the correct part of the propeller is crucial to the
performance of the propeller. Contact a local hobby
retail store for assistance.
Section 5: Installing the Rudder
Section 6: Propeller Balancing