Pro Boat PRB2550 - Manual (Page 7)

7
Unscrew the 2 knurled hatch-mounting screws from
the rear of the hatch. Lift the hatch from the boat.
Tools and Accessories Required
12 "AA" batteries
2.5mm hex wrench
Receiver Batteries
 1. Remove the 2.5mm hex head screws that
secure the clear Lexan radio box cover.
 2. Remove the receiver battery holder and install
4 “AA” alkaline batteries in the battery holder.
Note proper polarity.
 3. Wrap the battery holder in the foam
provided. Secure the foam using a rubber
band. Reinstall the battery holder into the
radio compartment.
Section 3: Removing the Canopy
Section 4: Installing the Radio System Batteries