Pro Boat PRB3100 - Manual (Page 10)

10
Ensure the antenna tube is properly placed
through the hull. It may be necessary to slightly
pull the antenna tube out to make certain the
radio range is sufficient.
Turn the transmitter on and check for correct
operation. The rudder control arm should
move toward the front of the boat when right
input is given. Conversely, when left input is given,
the control arm should move toward the back
of the boat.
With the propeller free from any objects, give some
throttle input to ensure that the motor is working.
If everything appears to be functioning correctly,
you are ready to run your boat!
Note: If you are transporting your
boat, make sure you disconnect the
battery from the speed controller
and then turn your radio off until
you are ready to run the boat.
Once ready, simply turn the radio
on and plug the battery into the
speed controller, again making sure
that the boat is in neutral.
Left Turn
Section 3: Checking the Radio System
Left Turn