Pro Boat PRB3100 User Manual

Page 11

Advertising
background image

11

Operate your ShockWave 26 RS in low to medium
wake conditions to avoid having problems with the
boat overturning. If the conditions are questionable,
adjust the prop strut down a bit to reduce the
likelihood of having the boat overturn.

Make sure the radio is "ON" and the battery is
plugged into the speed controller. Test the radio
system for proper operation and then carefully
place the boat in the water. Pilot the boat at slow
speeds, staying close to the shoreline to ensure you
have good control and that the boat is functioning
correctly. Be certain to avoid all objects in the
water at all times.

You may also turn the dual rate dial down to
reduce rudder travel in rough water conditions.

Once you feel comfortable with the control of
your boat, it is safe to go further away from the
shoreline and at faster speeds. When you notice
the boat begin to lose speed, bring the boat
back to shore. It will be necessary to allow the
electronic components to cool down and to replace
or recharge the battery before heading out again.

Section 4: Testing Your Boat in the Water

Section 5: Handling Adjustment

Steering Dual Rate

Loosen to Adjust

Outdrive

Advertising