Pro Boat PRB3100 - Manual (Page 9)


Install 8 “AA” alkaline batteries into the
transmitter, following the instructions provided
for your radio system.
Turn on your transmitter, making sure the radio
is in neutral. Carefully remove the hatch (scale
pilot cockpit). Install a fully charged 7.2V Ni-Cd battery pack into
the radio box. Follow the instructions included with
your fast charger to ensure a safe charge. Plug the
battery into the female battery connector attached
to the electronic speed controller.
Section 1: Installation of the Transmitter Batteries
Section 2: Installation of the 7.2V Ni-Cd Battery Pack