Jacking instructions, What to do in emergencies – Ram Trucks 2014 Chassis Cab Commercial - User Guide User Manual
Page 154
Advertising
![background image](/manuals/709184/154/background.png)
Jacking Instructions
Instructions
1. If equipped, remove the spare wheel,
jack, and tools from storage.
2. Using the wheel wrench, loosen, but
do not remove, the lug nuts by turning
them counterclockwise one turn while
the wheel is still on the ground.
3. When changing the front wheel, assemble the jack drive tube to the jack and
connect the drive tube to the extension tube. Place the jack under the axle as
close to the tire as possible with the drive tubes extending to the front. Connect
the jack tube extension and wheel wrench.
Warning Label
Front Jacking Locations
WHAT TO DO IN EMERGENCIES
152
Advertising