Ram Trucks 2014 Chassis Cab Commercial - User Guide - Manual (Page 12)

KEY FOB
This feature allows the driver to operate
the ignition switch with the push of a
button, as long as the Remote Keyless
Entry (RKE) transmitter is in the passen-
ger compartment.
The Keyless Ignition Node (KIN) has four
operating positions, three of which are
labeled and will illuminate when in posi-
tion. The three positions are OFF, ACC,
and ON/RUN. The fourth position is
START, during start RUN will illuminate.
NOTE:
In case the ignition switch does not change
with the push of a button, the RKE trans-
mitter (Key Fob) may have a low or dead
battery. In this situation a back up method
can be used to operate the ignition switch.
Put the nose side (side opposite of the
emergency key) of the Key Fob against the
ENGINE START/STOP button and push to
operate the ignition switch.
The Wireless Ignition Node (WIN) oper-
ates similar to an ignition switch. It has
four operating positions, three with de-
tents and one that is spring-loaded. The
detent positions are OFF, ACC, and ON/
RUN. The START position is a spring-
loaded momentary contact position.
When released from the START position,
the switch automatically returns to the
ON/RUN position.
Key Fob
1 — Air Suspension
2 — Unlock
3 — Lock
4 — Remote Start
5 — Panic
Key Fob
1 — Lock
2 — Unlock
3 — Remote Start
4 — Emergency Key Release
5 — Emergency Key
GETTING STARTED
10