Ram Trucks 2014 Chassis Cab Commercial - User Guide - Manual (Page 22)

Quad Or Crew Cab Trucks:
• The top tether anchorages in this vehicle are tether strap loops located between
the rear glass and the back of the rear seat. There is a tether strap loop located
behind each seating position. Follow the steps below to attach the tether strap of
the child restraint.
Right Or Left Outboard Seats:
1. Raise the head restraint and reach between the rear seat and rear glass to access
the tether strap loop.
2. Place a child restraint on the seat and adjust the tether strap so that it will reach
over the seat back, under the head restraint, through the tether strap loop behind
the seat and over to the tether strap loop behind the center seat.
3. Pass the tether strap hook under the head restraint behind the child seat, though
the tether strap loop behind the seat and over to the center tether strap loop.
Head Restraint In Raised Position Tether Strap Loop With Center Head Re-
straint In Raised Position
Tether Strap Through Outboard Tether Strap
Loop
GETTING STARTED
20