Ram Trucks 2014 Chassis Cab Commercial - User Guide - Manual (Page 26)

FRONT SEATS
Power Seats
The seat switch controls forward/backward and up/down. The recline switch controls
the angle of the seatback.
• Push the switch forward or rearward and the seatback will move in either direction.
Power Lumbar
The lumbar controls are located on the
outboard side of the seat cushion.
• The lumbar support can be increased
by pressing the front of the switch and
decreased by pressing the back of the
switch.
Memory Seat
The memory seat feature allows you to save the driver's seat position (excluding
lumbar position), driver's outside mirror position, adjustable brake and accelerator
pedals, Automatic Temperature Control (ATC) temperature setting and radio station
preset settings. The driver's memory buttons are located on the outboard side of the
driver's seat cushion.
• Adjust all memory profile settings,
press the middle button S (SET), then
press 1 or 2 within five seconds.
• To program a Key Fob to the memory
position, place the ignition switch in the
LOCK position and remove the Key Fob,
press and release the LOCK button on the
Key Fob to be programmed within five
seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved posi-
tions, or press UNLOCK on the pro-
grammed Key Fob.
Refer to the Owner's Manual on the DVD for further details.
GETTING STARTED
24