Crew full bench seat or split bench seat, Crew cab full or split bench seat, Standard/crew cab full bench seat – Ram Trucks 2014 Chassis Cab Commercial - User Guide User Manual

Page 19: Crew cab split bench seat, Getting started

Advertising
background image

LATCH — Lower Anchors And Tethers For CHildren (Crew Cab Full Bench Seat)

• Your vehicle is equipped with the child restraint anchorage system called LATCH,

which stands for Lower Anchors and Tethers for CHildren.

• The rear outboard seating positions have lower anchors and top tether anchors.

The rear center seating position has a top tether anchor only.

LATCH — Lower Anchors And Tethers For CHildren (Crew Cab Split Bench
Seat)

• Your vehicle is equipped with the child restraint anchorage system called LATCH,

which stands for Lower Anchors and Tethers for CHildren.

• All rear seating positions have lower anchors and top tether anchors.

Crew Full Bench Seat Or Split Bench Seat

• You may use the LATCH anchorage system until the combined weight of the child

and the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor
instead of the LATCH system once the combined weight is more than 65 lbs
(29.5 kg).

Crew Cab Full Or Split Bench Seat

The lower anchorages are round bars that are found at the rear of the seat

cushion where it meets the seatback. They are just visible when you lean into the
rear seat to install the child restraint. You will easily feel them if you run your finger
along the gap between the seatback and seat cushion.

In addition, Regular Cab models

have tether strap anchorages behind
the front center and right seats. Quad
Cab, Mega Cab and Crew Cab models
have tether strap anchorages located
behind each of the rear seats.

Standard/Crew Cab Full Bench Seat

• Do not install a child restraint in the

center position using the LATCH sys-
tem. Use the seat belt and tether an-
chor to install a child seat in the center
seating position.

Crew Cab Split Bench Seat

• If a child restraint installed in the center position blocks the seat belt webbing or

buckle for the outboard position, do not use that outboard position. If a child seat
in the center position blocks the outboard LATCH anchors or seat belt, do not
install a child seat in that outboard position.

GETTING STARTED

17

Advertising