Uconnect® 3.0, Clock setting, Audio – Ram Trucks 2014 Chassis Cab Commercial - User Guide User Manual
Page 63: Uconnect, Electronics
Uconnect® 3.0
Clock Setting
1. Press the MENU button at the bottom of the radio and push the ENTER/BROWSE
button for System Settings. Next, select the Time and Format setting and then
select Set Time by pushing the ENTER/BROWSE button.
2. Adjust the hours or minutes by turning the TUNE/SCROLL knob, then pressing
the ENTER/BROWSE button to move to the next entry. You can also select 12hr
or 24hr format by turning the TUNE/SCROLL knob, then pressing the ENTER/
BROWSE button on the desired selection.
3. Once the time is set press the “Back” or “OK” button to exit the time screen.
Audio
• Press the AUDIO button on the radio faceplate.
• The Audio Menu shows the following options for you to customize your audio
settings.
Treble, Mid, Bass, Fade, Balance, Speed Adjusted Volume, Loudness and Auto Volume
Offset
• Select the desired setting to adjust, then push the ENTER/BROWSE button. Turn
the TUNE/SCROLL knob to adjust the setting + or - 9. Press the “Back” button
when done.
ELECTRONICS
61