Concord Camera 4060 AF - Manual (Page 19)

17
TAKING PICTURES
SELF-TIMER
How to use Self-Timer:
1. In ( ) Camera Mode, press MENU to display the main menu.
2. Press the joystick to enter capture mode.
3. Press the joystick to highlight ( ) Self-Timer.
4. Press the OK button to set the ( ) Self-Timer.
5. Place the camera on a flat surface or tripod.
6. Use the LCD to compose the picture, and then press the Shutter button to activate the Self-Timer.
The Self -timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds and then the image
will be captured.
Note:
•
The Self-Timer is automatically deactivated once the image is taken.
• To deactivate the Self-Timer before taking a picture, follow the steps above and highlight another option
in the Capture Mode menu.
Photography Hints -
Since the Self-Timer LED indicator on the front of the camera flashes, you have time to join in the photograph
and know when the camera is done taking a picture when the Self-Timer LED light stops blinking.
MACRO MODE - CLOSE-UP SHOOTING
This mode enables the camera to capture pictures in close distances.
Setting Macro Mode:
1. The Macro Mode Switch is located in the front of the camera. Slide the Macro Mode Switch to ( ) to set
the Macro mode.
• The Macro icon ( ) will be displayed on the LCD.
Taking a picture in Macro Mode:
1. Frame the subject in the LCD.
• The best shooting distance is at 20 cm. (0.7 ft)
• Auto-focus is not available in Macro Mode. You can monitor the focus range through the LCD.
2. Press the Shutter button fully to take the picture.
SINGLE SHOT
CONTINUOUS SHOT
SELF-TIMER
RETURN SET
CAPTURE MODE
OK
A
AWB
07 ⁄ 04 ⁄ 03 02:40PM
4 M
N
28/45
CAPTURE MODE
QUALITY SETUP
IMAGE SIZE
SCENE SELECTION
WHITE BALANCE
RETURN SELECT
CAMERA
Q
A
AWB
07 ⁄ 04 ⁄ 03 02:40PM
4 M
N
28/45
4060 U Guide-E/F/G 7/8/03 12:53 PM Page 17