Concord Camera 4060 AF User Manual
Page 42
INSTALLING DIRECTX 9– WINDOWS 2000
Step 1
Make sure your camera is powered off and not connected to the computer.
Step 2
Make sure the computer is powered on and Windows 2000 is running.
Step 3
Close any other applications or software you may be running.
Step 4
Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on "My Computer" either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation. Double-click on
the file named Install and proceed to Step 5.
Step 5
Select the language. Click [OK]
Step 6
The installation screen will appear, click on Install
Microsoft DirectX 9.0
Step 7
The next screen will begin the DirectX setup.
Click [Next >]
Step 8
Click [Next >]
Step 9
Click [Finish]
Your computer will automatically reboot.
40
SOFTWARE INSTALLATION GUIDE
4060 U Guide-E/F/G 7/8/03 12:56 PM Page 40