Concord Camera 4060 AF - Manual (Page 33)

31
CUSTOMIZING THE CAMERA SETTINGS
SETTING THE TIME
1. In the Setup menu, press the joystick until Adjust Time is highlighted.
2. Press the joystick to enter the options.
3. Press the joystick to highlight the hour (HH), minutes (MM) or AM/PM.
• The selection will blink when it is highlighted.
4. Press the joystick to change the data in the blinking position until you
reach the desired setting then press OK.
Note:
•
The time can be displayed in a 12-hour or 24-hour format In ( ) Review Mode, the time display is
fixed to 24-hour format. Please go to page 28 to change this setting.
• If the battery is removed for more than 4 minutes, the time will return to its default setting.
• Set Date/Time! will appear on the LCD when the camera is turned on. Press the Shutter button slightly
to turn the reminder off.
SETTING THE LCD BRIGHTNESS
How to set the LCD Brightness:
1. In the Setup menu, press the joystick until LCD Brightness is highlighted.
2. Press the joystick to display the LCD Brightness bar on the LCD.
3. Press the joystick / to adjust the brightness.
4. Press the OK button to select.
• The camera will return to picture taking mode or review mode.
ADJUST TIME
OK
0 1 : 0 1 A M
RETURN SET
EV COMPENSATIION
SETUP
RETURN SELECT
CAMERA
+ – SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN SELECT
SETUP LCD BRIGHTNESS
OK
– +
SET
4060 U Guide-E/F/G 7/8/03 12:56 PM Page 31