StarTech.com CABCONS1716I - Manual (Page 15)

Instruction Manual
11
Network Configuration
CABCONS1716I offers four distinct methods for configuring the unit for your network.
Which method will work best depends on your level of experience and your specific
network configuration.
Web Configuration Using the On-Screen Display
Upon boot-up, including following a reset, CABCONS1716I will display a window on
the local video output (front VGA connector), that will appear as follows:
The initial screen will display the IP address assigned by your existing DHCP server (if
present on your network). If no DHCP server is detected, a factory assigned IP address
will be displayed in its place (10.0.0.15 by default). Please make note of the assigned IP
address, as you will need to enter it into your web browser to access the Web Interface.
Assigned IP Address
NOTE: Connecting the remote computers prior to following the steps
outlined below can result in system instability. Please refrain from
connecting the remote computers, until the local peripherals have
been connected.