StarTech.com CABCONS1716I - Manual (Page 36)

Instruction Manual
32
Video Tuning menu
Use the Auto Everything button to automatically fine-tune all three adjustments. If the
test pattern for Color Offset calibration is not present on the screen, then the Color
Offset adjustment is skipped.
Changes/frame indicates the number of 16x16 blocks of video that are being sent, on
average, for every frame of video. With a static image being displayed by the server,
this number will be zero (shown as -nil-). Moving the mouse, for example, will cause
the number to jump to about 2 or 3.You may use this number to judge the picture
quality as you adjust the controls on this menu.
Picture Positioning affects the image position on your screen. If you see a black
line on either side of your screen, or at the top or bottom, you can use the arrow
buttons to shift the image in that direction. Pressing Auto does the same thing for
you automatically. Use Save to save the changes you have made manually. Since this
adjustment depends on the video mode, separate values are stored for each
video mode.
Color Offset is a fine tuning adjustment that requires the use of a test pattern. There is
a copy of the test pattern available on the Help menu of the integrated web server.You
must arrange for that image to be shown on the host computer. Do not allow scaling,
cropping or any other changes to that image. Press the Auto button and the system
will calibrate color for the best possible picture within approximately one minute.