StarTech.com CABCONS1716I - Manual (Page 33)

Instruction Manual
29
Main Menu
To access the main menu, quickly press F7 twice.You must press the key twice within
one second. If you press it once or too slowly, then the F7 key(s) are sent to the host,
just like any other key. This is the only way to get into the menu system, if the Bribar is
disabled. Here is the main menu for a typical system:
The main menu window may be moved by clicking and dragging on the title bar. It can
be closed by pressing Esc, or by clicking on the red X in the top right corner.
Here is a guide outlining various fields from the VNC Main Menu. Most of the functions
operate immediately. Other functions require a response to a confirmation prompt first
before performing the requested function.
• Identification: Fixed text label that is defined by the user in the Web interface. This
does not affect the operation of the system and is intended to assist
with administration.
• Status: Current status of the attached system and the status of the unit.
• B/W Min/Avg/Max/Auto: Bandwidth control, wherein current operation will be
indicated with white highlighting. If you choose Min/Avg/Max then you will override
the default, Auto. As the automatic mode measures actual network performance,
you may see the current mode switch from Min up to Avg or Max. The different
modes indicate more time spent on compression versus more bandwidth. There is
no visual difference between the modes, but there can be a noticeable difference in
speed and smoothness.