StarTech.com CABCONS1716I - Manual (Page 16)

Instruction Manual
12
If static IP addresses are assigned, you will likely need to change the Net Mask, IP
Address and other details, prior to connecting via your Web browser. If this is the
case, connect a local PS/2 keyboard and press the Enter key. In order to proceed, you
will require an administrative username and password. By default, the username
and password are admin. You will be given the opportunity to change the password
(recommended) to be performed once the configuration is complete.
Alternatively, you may press the Setup button on the front panel, and you will not be
asked to enter the admin password if you just press Enter.
At the main OSD menu (pictured below), you will be given several basic setup options.
To configure CABCONS1716I to your required network settings, use the Network Setup
Wizard. To select from the menus provided, use the arrow keys on your keyboard.
Web Configuration Using DHCP
This method requires that your network implement DHCP (Dynamic Host
Configuration Protocol), usually on a server or network access device such as a router
that dynamically allows devices to join the network without pre-configuration.
It also assumes that you will have easy access to your network’s DHCP