StarTech.com CABCONS1716I - Manual (Page 62)

Instruction Manual
58
Touchpad Replacement
The built-on Touchpad offers “wheel mouse” functionality. The area of the Touch Pad to
the right side of the two small triangular marks is the simulated “wheel” as
shown below:
To remove the Touch Pad, press the tab underneath it upward to release the latch, then
slide it outwards until the Touch Pad can be lifted up clear from the notches, as shown
in the figure below (right side). The Touchpad is attached by a piece of mini-USB cable.
To install the Touchad, extend just enough mini-USB cable and slide the Touch Pad all
the way in till you hear a click sound as it is locked in position.
Scroll
Wheel
Area
Triangular Marker
Left Mouse Button Right Mouse Button
Triangular Marker**