Capresso Impressa S7 - Manual (Page 21)

15.7 PROGRAMMING WATER HARDNESS
(This function only comes up if the Claris Filter Cartridge is
set to
FILTER NO .) To change the setting for the water
hardness see chapter 10.
15.8 PROGRAMMING ECONOMY MODE
In the setting ECONOMY MODE ON the heating element for
steam turns off 10 minutes after last use of steam.
In the setting
ECONOMY MODE OFF the heating element for
steam turns off 20 minutes after last use of steam.
Whenever the heating element is off the green indicator lights
inside the steam buttons are off.
COFFEE READY
• Press the P button.
POWDER QUANTITY / PRESS KEY
• Press the + button until the display shows
ECONOMY MODE OFF
• Press the P button.
• Press the + button to change to
ECONOMY MODE ON
• Press the P button to confirm.
• Press the N button to return to
COFFEE READY or press the
+ button to go to the next function.
15.9 PROGRAMMING TIMER/CLOCK
If you want the machine to turn itself on automatically you need
to set the time.
COFFEE READY
• Press the P button.
POWDER QUANTITY / PRESS KEY
• Press the + button until the display shows
TIME –.–
• Press the P button.
• Press the + or – button to set the hours.
• Press the P button to confirm the hours.
• Press the + or – button to set the minutes.
• Press the P button to confirm the minutes.
Attention: The time is displayed in the 24hr mode (not AM/PM).
Therefore if the actual time is 3:45 p.m. you must set the time
to 15:45.
• Now press the + button to advance to the next function.
15.10 PROGRAMMING AUTO TURN-ON TIME
After setting the actual time (see chapter 15.9) you can now set
the auto turn-on time.
UNIT ON —.—.
• Press the P button.
• Press the + or – button to set the hours.
• Press the P button to confirm the hours.
• Press the + or – button to set the minutes.
• Press the P button to confirm the minutes.
The machine will turn itself on at the programmed time.
IMPORTANT: To switch off the automatic timer proceed as
follows:
• Press the P button.
• Press the N button.
UNIT ON :—
21.