Capresso Impressa S7 - Manual (Page 26)

• Turn selector switch (Fig. 3L) to the water symbol and press
the DECALC button (Fig. 3A, T1).
• The machine will pump the mixture in intervals through the
steam nozzle into the container underneath.
During this time the display will show:
UNIT DECALC/PLEASE WAIT
After about 12 minutes the machine "beeps". The display
will show
PRESS CALC .
• Empty the container underneath the steam nozzle and
place it underneath the hot water release (Fig.1,14).
• Now push the DECALC button again (Fig. 3A, T1). The
machine will now pump the mixture in intervals through the
hot water spout.
UNIT DECALC/PLEASE WAIT
• After another six to eight minutes the machine will beep
again. The display will show CLOSE TAP . Turn the
selector switch (fig. 3,L) back to the cup symbol.
• The machine will now pump the remaining mixture in intervals
into the used water tray inside.
UNIT DECALC/PLEASE WAIT.
• After another 20 to 30 minutes the machine "beeps" and the
shows EMPTY TRAY .
• Carefully remove the used water tray (Fig.1,18 ), empty it,
rinse thoroughly and replace.
FILL WATER
• Remove the water tank, rinse thoroughly, fill it halfway with
fresh water and then replace.
OPEN TAP
• Place a 12 oz. container underneath the steam nozzle and
turn the selector switch (Fig.3,L) to the water symbol.
PRESS CALC
• Press the DECALC button.
The machine will pump the fresh water in intervals through the
steam nozzle into the container underneath. During this time the
display will show:
UNIT DECALC/PLEASE WAIT
• When the machine "beeps" remove container from under the
steam nozzle, empty it and place it under the hot water
release. (Fig.1,14).
• Push the DECALC button again (Fig. 3A, T1). The machine
pumps fresh water in intervals through the hot water spout.
UNIT DECALC/PLEASE WAIT
The machine "beeps" again. The display shows CLOSE TAP .
• Turn the selector switch (Fig.3, L) back to the cup symbol.
• The machine will now pump fresh water in intervals into the
used water tray inside.
UNIT DECALC/PLEASE WAIT
The machine beeps and the shows
CLEAN CONTACTS/ EMPTY TRAY
• Empty the used water tray, clean the contacts
(see Fig. 19 and Fig. 20) and replace tray.
PLEASE WAIT
RINSE UNIT
• Push the RINSE button (Fig. 2,F)
COFFEE READY
18. TIPS FOR PERFECT COFFEE
Height adjustable coffee-spout
Adjust the height of the coffee-spout to the size of your cups.
26.