Cisco WES610N - Manual (Page 20)

19
Specifications Linksys WES610N/WET610N
19
WET610N
Model WET610N
Standards IEEE 802 3u, 802 11g, 802 11b, 802 11a, 802 11n
LEDs Power, Ethernet, Wi-Fi Protected Setup™,
Wireless
Ports Ethernet, Power
Buttons Reset, Wi-Fi Protected Setup
Cabling Type CAT5e
Antennas 3 (internal)
Antenna Connector Type N/A
Detachable (Yes/No) No
Modulations 802 11a: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
802 11b: CCK/QPSK, BPSK
802 11g: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
802 11n: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
RF Pwr (EIRP) in dBm 802 11a: 15 dBm (typical) @ 54Mbps
802 11b: 18 dBm (typical) @ 11 Mbps
802 11g: 16 dBm (typical) @ 54 Mbps
802 11n: 12 dBm (typical) @ 130 Mbps
(HT20), 270 Mbps (HT40)
Receive Sensitivity 802 11a: -72 dBm (typical) @ 54 Mbps
802 11b: -85 dBm (typical) @ 11 Mbps
802 11g: -73 dBm (typical) @ 54 Mbps
802 11n: -70 dBm (typical) @ MCS15/2 4 GHz,
-69 dBm (typical) @ MCS15/5 0 GHz
Antenna Gain in dBi 1
Wireless Security WEP, Wi-Fi Protected Access™ (WPA), Wi-Fi
Protected Access™ 2 (WPA2)
Security Key Bits Up to 128-bit encryption
Environmental
Dimensions 5 71” x 4 17” x 2 05”
(145 x 106 x 52 mm)
Weight 5 61 oz (159 g)
Certification FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi
(IEEE 802 11a/b/g/draft n), WPA2™,
Wi-Fi Protected Setup, WMM®
Power 12V, 1A
Operating Temperature 32 to 104ºF (0 to 40ºC)
Storage Temperature -4 to 140ºF (-20 to 60ºC)
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
Specifications are subject to change without notice