TeeJet LH665 VRT - Manual (Page 21)

LH 665 VRT O PERATORS MANUAL A PPLICATION CONTROL , OPERATION
LH A GRO 3.5
STARTING AND NAMING FIELDS
Step Key Procedure
1 Press the MENU key until the following menu selection keys
appear at the bottom of the display (screen section C):
FIELD LOAD OPTIONS HIDE MAP
2 FIELD Press the FIELD key twice to show the following screen:
ACCEPT CANCEL
VIEW
CONFIG
F1: DG
ACTIVE FIELD
F1:
PRESS     TO EDIT NAME
ACTIVE CONFIGURATION
PRODUCT CONTROLLER CHANNEL
PRODUCT 1 LH 5000 N/A
3 If there is not a rectangular box around the field section press
the function key to the right of the section.
4 Press the right ARROW key to move the cursor and use,
thereafter, the ARROW UP/DOWN keys to select the letter.
Move the cursor to the right using the right ARROW key. The
field name can have max. 8 characters. If the active
configuration is correct, press the ACCEPT key.
5
VIEW
CONFIG
If the configuration is incorrect and needs changing, press
the VIEW CONFIG key and follow the steps 4 to 7 as
described on page 3.7.
6
ACCEPT
Press the ACCEPT key.
START NEW FIELD
Step Key Procedure
1 Follow steps 1 – 3 as described above.
2 Press the ARROW UP key until CREATE NEW FIELD is
displayed. Name the field and select the correct crop type as
described above, press the ACCEPT key.