TeeJet LH665 VRT - Manual (Page 63)

LH 665 VRT O PERATORS MANUAL D ATA CARDS & DATA MANAGEMENT
LH A GRO 11.7
Step Key Procedure
5
ERASE
Pressing the ERASE key deletes the data on the card and
displays the following screen:
ACCEPT CANCEL
CREATE LOG FILE
A new log file must be created
for 22/4/1999 to log data
New log file: 99042201.YLD
6
ACCEPT
Press the ACCEPT key and a new file for the day is created.
KG CALIBRATION AND DATA LOGGING TO A CARD
It is possible to copy the memory to a data card when the LH 665 is switched off.
This copying of the memory to a data card is necessary when the LH 665 is used
together with DGPS equipment as the kg calibration data is also copied to the data
card.
Press the COPY key and kg calibration data and the memory are copied to the
data card. The LH 665 will automatically switch off after copying the data.
The data card must not be removed until the LH 665 switches off.
DATA MANAGEMENT
As all of the functions under CARD SETUP are similar for all operating modes they
are described one by one in the following:
The following functions are found under CARD SETUP follow steps one to four on
page 11.2.
COPY TO CARD
Step Key Procedure
1
COPY TO
CARD
Pressing the COPY TO CARD key, copies all data in the LH
665 to the data card.