TeeJet LH665 VRT - Manual (Page 27)

LH 665 VRT O PERATORS MANUAL A PPLICATION CONTROL , OPERATION
LH A GRO 3.11
WORKING WIDTH
Step Key Procedure
1
SWATH
X.XX M
The present working width in metres sent from the implement
controller.
Press the lower RIGHT ARROW key to display more functions.
TOTAL UNITS
Step Key Procedure
1
TOTAL
UNITS
XXXXX units
Total units for the present field or load.
GROUND SPEED
Step Key Procedure
1
GROUND
SPEED
XX.X km/hr
The actual speed displayed in kilometres per hour.
AREA PER HOUR
Step Key Procedure
1
AREA
PER HR
XX.X ha/hr
The present work rate displayed in hectares per hour.
DISTANCE
Step Key Procedure
1
DISTANCE
XXX M
The measured distance for the present field or load (the
distance displayed is normally for the load and will only be
displayed for the whole field when the field key is displayed).
Press the lower RIGHT ARROW key to display more functions.