TeeJet LH665 VRT - Manual (Page 65)

LH 665 VRT O PERATORS MANUAL D ATA CARDS & DATA MANAGEMENT
LH A GRO 11.9
LOG FILE
All files on the data card are shown when EDIT is selected for log file under
CARD SETUP; it is also possible to create a new file.
CHANGING THE LOG FILE
Step Key Procedure
1
ACCEPT
The file to be logged to can be selected using the ARROW
UP/DOWN keys.
CREATE FILE
Step Key Procedure
1
CREATE
FILE
A new log file is created when the CREATE FILE key is
pressed.
FILE NAMES
YIELD FILES
The LH 665 always names log files with the suffix YLD. The files are named after
the date and the number of files on the data card with the same date. The first
yield file created on, i.e. 25/07-1999 will be named 99072501.YLD. If other log files
are created on the same day the last two digits will be changed, so the second log
file for 25/07-1999 will be named 99072502.YLD and so on.
FILED BOUNDARY FILES
When the LH 665 is used for field boundary measurements, the log file will be
saved with the suffix BDY. The files are named in the same way as yield files.
APPLICATION RATE FILES
Application rate files created on the farm’s PC are named by the software used to
create the task. All files of this type are suffixed TGT.
A log file is created automatically by the LH 665 when an application rate task is
carried out. These log files contain information of what actually happened in the
field and are named as for yield files.
NAVIGATION FILES
Navigation files created on the farm’s PC are named by the software used to
create the navigation file. All file of this type are suffixed PFN.